Forensic Engineering Usage of Surveillance Video in Accident Reconstruction

Authors

  • Richard M. Ziernicki
  • William H. Pierce
  • Angelos G. Leiloglou

DOI:

https://doi.org/10.51501/jotnafe.v31i2.2

Keywords:

Accident reconstruction, forensic engineering, video, pedestrian, animation, photogrammetry, barrel lens distortion, surveillance video, focal length

Abstract

With the increased use of surveillance cameras, more and more video footage depicting accidents is available these days for accident reconstruction. The authors present an accident reconstruction case study involving an impact between a tractor-tanker and a pedestrian using surveillance video footagefrom a nearby business. Overall, the video footage is of poor quality, which is typical of surveillance video. This is usually evidenced by low frame rate, low resolution, and significant lens distortion not to mention the fact that the video is not centered on the actual accident. This paper addresses a solution to minimize the error often associated with such surveillance video. First, the distortion in the video footage is corrected using software that warps the image with a reverse distortion. Once the distortion in the video footage is corrected, then accurate photo/videogrammetry is performed to attain desired measurements. These measurements are then processed to perform a more accurate and detailed time/space analysis. Finally, graphics and photo-realistic animation are used to present the accident in time-space domain.

Downloads

Published

2014-01-01

How to Cite

Ziernicki, Richard M., William H. Pierce, and Angelos G. Leiloglou. 2014. “Forensic Engineering Usage of Surveillance Video in Accident Reconstruction”. Journal of the National Academy of Forensic Engineers 31 (2). https://doi.org/10.51501/jotnafe.v31i2.2.

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3 > >>