Forensic Engineering Analysis Of Trailer Sway Accidents

Authors

  • Mark A.M. Ezra
  • Landiss Danel J.

DOI:

https://doi.org/10.51501/jotnafe.v25i1.685

Keywords:

Trailer, sway

Abstract

This Paper Describes A Method For The Reduction Of System Response Data For Second Order Electrical Or Mechanical Systems When That Data Is Available Only In Graphical Format. The Method Of Data Reduction Described Allows Quantitative Evaluation Of Generally Accepted Second Order System Parameters Such As: System Time Constant, Damped Natural Frequency, Damping Ratio, And Exponential Decay Time. The Discussion Includes The Application Of The Described Graphical Technique To Experimental System Response Data Of Coupled Systems, But Whose Experimental Response Approximates That Of An Isolated Second Order System. A Practical Application Of The Described Data Reduction Method Is Covered In Detail. The Described Technique Is Applied To The Analysis Of Data Obtained Experimentally For The Response Of A Tow Vehicle And Trailer System To A Standardized Steering Disturbance. Finally, The Statistical Validation For Experimental System Response Data And The Results Obtained From The Analysis Of Such Data, Using The Described Graphical Method, Is Discussed.

Published

2008-01-01

How to Cite

Ezra, Mark A.M., and Landiss Danel J. 2008. “Forensic Engineering Analysis Of Trailer Sway Accidents”. Journal of the National Academy of Forensic Engineers 25 (1). https://doi.org/10.51501/jotnafe.v25i1.685.

Issue

Section

Articles

Similar Articles

<< < 1 2 3 > >> 

You may also start an advanced similarity search for this article.